Arduino POE WIZnet W5500 Ethernet Shield Arduino POE WIZnet W5500 Ethernet Shield Arduino POE WIZnet W5500 Ethernet Shield Arduino POE WIZnet W5500 Ethernet Shield Arduino POE WIZnet W5500 Ethernet Shield Arduino POE WIZnet W5500 Ethernet Shield Arduino POE WIZnet W5500 Ethernet Shield Arduino POE WIZnet W5500 Ethernet Shield

Arduino POE WIZnet W5500 Ethernet Shield

$45.90
 Sold Out 
  • Model: IM140725005
  • Shipping Weight: 50 g
  • 0 Units in Stock
  • Manufactured by: IteadStudio

Overview

W5500 Ethernet shield is a WIZnet W5500 breakout board with POE and Micro-SD designed for Arduino platform. 5V/3.3V compatible operation voltage level makes it compatible with Arduino boards, leafmaple, and other Arduino compatible board.
DESCRIPTION

W5500 Ethernet shield is a WIZnet W5500 breakout board with POE and Micro-SD designed for Arduino platform. 5V/3.3V compatible operation voltage level makes it compatible with Arduino boards, leafmaple, and other Arduino compatible board.

WIZnet„s Hardwired TCP/IP is the market-proven technology that supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE protocols. W5500 embeds the 32Kbyte internal memory buffer for the Ethernet packet processing. If you use W5500, you can implement the Ethernet application just by adding the simple socket program. It’s faster and easier way rather than using any other Embedded Ethernet solution. Users can use 8 independent hardware sockets simultaneously.

Features

  • 3.3/5V level
  • On-board micro SD card slot
  • Support Endspan and Midspan Modes POE by adding SPD8001 PD module to this shield
  • Supports following Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  • Supports 8 independent sockets simultaneously
  • Supports Power down mode
  • Supports Wake on LAN over UDP
  • Supports High Speed Serial Peripheral Interface (SPI MODE 0, 3)
  • Internal 32Kbytes Memory for Tx/Rx Buffers
  • 10BaseT/100BaseTX Ethernet PHY embedded
  • Support Auto Negotiation (Full and half duplex, 10 and 100-based)
  • Not support IP Fragmentation

PCB size 83.82mm X 57.91mm X 1.6mm
Power supply 5V DC
Indicator SPD,LINK,DUP,ACT
Communication Protocol SPI

Electronic Characteristics

Parameter Min. Typical Max. Unit
Power supply 4.5 5 5.5 VDC
Input voltage VinH(Target voltage=3.3V) 3 3.3 3.6 V
Input voltage VinH(Target voltage=5V) 4.5 5 5.5 V
Input voltage VinL -0.3 0 0.5 V
Current Consumption - - 150 mA

Specification

Link Wiki N/A
Version 1.1
Compatible Mainboard
  • Arduino Deumlanove/UNO
  • Arduino MEGA
  • Iteaduino
  • Iteaduino ADK
  • Iteaduino BT
  • Iteaduino MEGA 2560
  • Seeeduino
  • Seeduino MEGA
Shield Functions Ethernet
Board Size 83.82mm X 57.91mm X 1.6mm
Operation Level
  • Digital 3.3V
  • Digital 5V
Stackable No
Model IM140725005
Accessories No
Weight 50.0000

Documents

Please visit Itead's wiki page for more info about this product.




REVIEWS