Buzzer Brick


  • Model: IM120710008
  • Shipping Weight: 15 g
  • 4 Units in Stock
  • Manufactured by: IteadStudio


Buzzer brick can be connected to the digital I/O or PWM port. It is low activated and when connected to PWM, the buzzer can produce a variety of tones like electronic organ.

What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in and pulling out. Compared to traditional universal boards and circuit modules assembled with various electronic components, electronic brick has standardized interfaces, plug and play, simplifying construction of prototype circuit on one’s own. There are many types of electronic bricks, and we provide more than twenty types with different functions including buttons, sensors, Bluetooth modules, etc, whose functions cover from sensor to motor drive, from Ethernet to wireless communication via Bluetooth, and so on. We will continue to add more types to meet the various needs of different projects.

Electronic brick of buzzer can be connected to the digital I / O port, when the output is low, buzzer will give a long sound. If it is connected to an analog pulse width modulation (PWM) output , the buzzer can produce a variety of tones, which can be made into the speaker of electronic organ.


1. Plug and Play, easy to use.Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.

2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock

3. With separation circuit to prevent damages to I / O port.


PCB Size 33.0mm X 14.0mm X 1.6mm
Working voltage 5V DC
Operating voltage 5V DC
Compatible interfaces 2.54 3-pin interface and 4-pin Grove interface(1)

Note 1:  S for digital input port , V and G for voltage at the common collector and ground respectively

Electrical characteristics

Parameter Min. Typical Max. Unit
Working voltage 4.5 5 5.5 VDC
Digital input voltage (VCC=5V) 0 - 5 V
Working current (VCC=5V) - 24 - mA
Resonance frequency 2 2.5 3 kHz

Demo Code

Connect S port of electronic brick of buzzer to D13 port of Arduino, and we will use the following program to make buzzer produce sounds at intervals of 1s.


Brick Type Light and Sound
Brick Interface 3PIN
Brick Power Supply 5V
Board Size33 x 14 x 1.6mm
LED Color No
Weight 15.00g
Model IM120710008





Demo Code