Big Button Brick

 Sold Out 
  • Model: IM120710022
  • Shipping Weight: 20 g
  • 0 Units in Stock
  • Manufactured by: IteadStudio


Big button switch brick is finger-sized, which can be connected to I/O port of main board or externally wired to bread board.

What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in and pulling out. Compared to traditional universal boards and circuit modules assembled with various electronic components, electronic brick has standardized interfaces, plug and play, simplifying construction of prototype circuit on one’s own. There are many types of electronic bricks, and we provide more than twenty types with different functions including buttons, sensors, Bluetooth modules, etc, whose functions cover from sensor to motor drive, from Ethernet to wireless communication via Bluetooth, and so on. We will continue to add more types to meet the various needs of different projects.

Electronic brick of button switch is finger-sized, which can be connected to I/O port of main board or externally disconnected to check the switch state so as to control ON/OFF of LED lamp.


1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.

2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock

3. Hardware with debouncing function for more stable output



PCB size 36.0mm X 14.0mm X 1.6mm
Working voltage 3.3 or 5V DC
Operating voltage 3.3 or 5V DC
Compatible interfaces 2.54 3-pin interface and 4-pin Grove interface(1)

Note 1: S for digital output port, V and G for voltage at the common collector and ground respectively. Generally speaking, digital output is VCC; when the button is pressed down, the digital output is 0V.

Electrical characteristics

Parameter Min. Typical Max. Unit
Working voltage 3 5 5.5 VDC
Digital output voltage (VCC=5V) 0 - 5 V

Demo Code

Connect S port of electronic brick of button switch to D2 port of Arduino board, and we will use the following program to read the digital value. When the digital value is high level, LED lamp will be ON; when the digital value is low level, LED lamp will be OFF.


Revision record

Version Description Date Written by
v1.0 Initial edition 12th, April, 2013 Stan Lee


Brick Type Button and Switch
Brick Interface 3PIN
Brick Power Supply 5V
Board Size36 x 14 x 1.6mm
LED Color No
Weight 20.00g
Model IM120710022




Demo Code

Customers who bought this product also purchased...